We are scaffolding design specialists with over 1000+ projects.
Beamed Independent Scaffold
County Square Shopping Centre, AshfordOct 2020
Heavy Duty Scaffold Ramp
Navigator Terminals, Oliver RoadMar 2021
Temporary Roof Scaffold
Xchange Point, London Jun 2019
Encapsulated Access Scaffold
Twelvetress Bridge, LondonFeb 2020
BEAMED ACCESS SCAFFOLD
Finsbury Park, LondonApr 2021
PROTECTION GANTRY
Lymington Avenue, LondonMar 2020
PEDESTRIAN BRIDGE
South Dock, LondonNov 2020
A frame handrail protection
Regent Street, LondonJul 2021
BEAMED ACCESS SCAFFOLD
9 Sutton Road, LondonMar 2021
Access Scaffold
York House Wembley, LondonMar 2020
Temporary Roof Scaffold
7 Dunlace Road, LondonFeb 2019
Free standing crash deck scaffold
9 Newell Street, LondonOct 2019
Butted Crash Deck Scaffold
Whittington House, LondonJan 2018
Lifting Beam Scaffold
150 Cheapside, LondonApr 2020
60m Height Access Scaffold
Selworthy & Sparkford House, LondonFeb 2021
Lifting Beam Scaffold
South Bank, LondonJan 2021
Beamed Independent Scaffold
County Square Shopping Centre - Shopping Centre, 108 Elwick Rd Ashford, TN23 1YB
We have been asked to design a 20-meter height Independent Access Scaffold for cladding works. Bridging 13.00 meters above the shopping centre entrance we used double Dessa beams protecting the public and the glass canopy below. A clear and precise 2D working drawing was issued for this project.
Date: October 2020
Design: EK Scaffold Design
Category: CATII
Heavy Duty Ramp
Navigator Terminals, Oliver Road
The client required a heavy-duty scaffolding ramp supporting a 7000kg Dumper Machine and 4500kg Excavator to facilitate material transportation. A 2D working drawing and a 3D animation detail were combined for this job, taking the scaffolding design to another level.
Date: March 2021
Design: EK Scaffold Design
Category: CATII
Temporary Roof Scaffold
Xchange Point, London
The scaffolding structure was used to allow access to the existing roof, remove the gravel and repair the insulation. Due to the unique limitations of the building, there were some significant challenges to overcome. Unable to tie the scaffold to the building, we used a rigid wing brace system connecting 450mm Haki Beams to all structural lifts.
Date: June 2019
Design: EK Scaffold Design
Category: CATII
Encapsulated Access Scaffold
Twelvetress Bridge, London
We have been asked to design an 80 meter long and 20m wide Access Scaffold for Twelvetrees bridge refurbishments works. The scaffold was fully encapsulated with shrink wrap and 116 tonnes of kentledge was used for erecting the scaffold and to stabilise the scaffold from overturning. Our 2D working drawing was clear and precise, showing every detail necessary, for the scaffolders to build the structure.
Date: February 2020
Design: EK Scaffold Design
Category: CATII
Beamed Access Scaffold
Finsbury Park, London
Our client required an Independent Scaffold Design to facilitate access to the face of the building for cladding repairs and safe access for pedestrians underneath the scaffold.
Our 2D working drawing was clear and precise, showing every detail necessary, for the scaffolders to build the structure. Double 750mm girders were used for this project to span the 13.00m bridge safely.
Date: April 2021
Design: EK Scaffold Design
Category: CATII
Protection Gantry
Lymington Avenue, London
Our client required a Protection Gantry with a Maber500 Hoist sitting on top and an Independent Access Scaffold to facilitate refurbishments and cladding works. Our 2D working drawing and 3D design were clear and precise, ready for the scaffolders to build the structure.
Date: March 2020
Design: EK Scaffold Design
Category: CATII
Pedestrian Bridge
South Dock, London
Our client required a Pedestrian Scaffold Bridge to facilitate safe access across the south dock pier. Triple Apollo 750mm X Beams were used for this project to span the 18.00m bridge safely. A 2D working drawing and a 3D animation detail were combined for this job, taking the scaffolding design to another level.
Date: November 2020
Design: EK Scaffold Design
Category: CATII
A Frame Protection Handrail
South Dock, London
No job is too small for EK Scaffold Design. Our client required handrail protection to facilitate access to the roof for solar panel installation.
Date: July 2021
Design: EK Scaffold Design
Category: CATI
Beamed Access Scaffold
9 Sutton Road, London
The scaffolding structure was used to allow access on the face of the building, for cladding work. Due to the unique limitations of the building, there were some significant challenges to overcome. Unable to tie the last two lifts of scaffold to the building, we used a combination of external rakers, plan bracing and ledger bracing allowing the scaffold to be safe to use. Multiple Apollo 750 X beams and Layher 750 beams were used for this project, spanning and cantilevering over a road used by UK police.
Date: March 2021
Design: EK Scaffold Design
Category: CATII
Access Scaffold
York House Wembley, London
We have been asked to design a 50-meter height Independent Access Scaffold for cladding works. Due to the unique limitations of the building, there were some significant challenges to overcome. Unable to base the scaffold on the ground, we used shear tie plates fixed to existing concrete columns, every four lifts. A 2D working drawing and a 3D detail were combined for this job, taking the scaffold design to another level.
Date: March 2020
Design: EK Scaffold Design
Category: CATII
Temporary Roof Scaffold
7 Dunlace Road, London
Temporary roof, with full multi-level Access Scaffold and Access Ramp for mini Kubota to facilitate roof conversion and excavation works. We provided a 2D working drawing and a 3D scaffold design for better visualisation leaving the scaffolders in no doubt about what they should build.
Date: February 2019
Design: EK Scaffold Design
Category: CATII
Free standing crash deck
9 Newell Street, London
The client required a free-standing crash deck to facilitate wall demolition and public protection. A 3D drawing was required for the party wall agreement, together with a 2D working drawing.
Date: October 2019
Design: EK Scaffold Design
Category: CATII
Butted Crash Deck Scaffold
Whittington House, London
Small Crash Deck to facilitate demolition works and roof glass removal. A 2D working drawing and a 3D drawing was combined for this job taking the scaffold design to another level.
Date: January 2018
Design: EK Scaffold Design
Category: CATII
Lifting Beam Scaffold
150 Cheapside, London
Our client required a free-standing lifting beam on a top roof to facilitate a 300kg aircon replacement. We used a Niko rail track and a small hoist for lifting operation. Scaffold tubes were used to stabilise the scaffold from overturning.
Date: April 2020
Design: EK Scaffold Design
Category: CATII
60 m Height Access Scaffold
Selworthy & Sparkford House, London
Our client required a 60m height Scaffold for two blocks to facilitate cladding work. Selworthy House was built with tube and fitting and Sparkford House was constructed with System Layher Scaffold. Our 2D working drawing was clear and precise, showing every detail necessary, for the scaffolders to build the structure.
Date: February 2021
Design: EK Scaffold Design
Category: CATII
Lifting Beam Scaffold
South Bank, London
Our client required a 400 kg lifting beam scaffold to facilitate material transportation. We used a small hoist for lifting operations. Kentledge and box ties were required to stabilise the scaffold from overturning.
